Password Protection For Booting Of The Operating System - Fujitsu LIFEBOOK E736 Operating Manual

Security functions
Removing passwords
To remove a password (without setting a new password) perform the following steps:
Password User HDDpassword SupervisorHDDpassword
► Start the BIOS Setup Utility and go to the Security menu.
► Highlight the Set Supervisor Password or Set User Password field and press the Enter key.
You will be requested to enter the current password by the Enter Current Password prompt.
You will be requested to enter a new password by the Enter New Password prompt.
► Press the Enter key twice.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter key.
The notebook will now reboot with the password removed.
Removing the supervisor HDD password simultaneously deactivates the user HDD password.

Password protection for booting of the operating system

With the supervisor HDD password you have set in the BIOS Setup Utility
(see section
can also prevent booting of the operating system.
Operating system
Activating system protection
► Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
► Select the Password on Boot option and press the Enter key.
► Select the desired option (Disabled, First Boot or Every Boot) and press the Enter key
► Select the Save Changes & Exit option under Exit.
The notebook will reboot. You will be prompted to enter your password
(the supervisor HDD password).
Deactivating system protection
► Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
► Select the Password on Boot option and press the Enter key.
► Select the Disabled option and press the Enter key.
If you do not want to change any other settings, you can exit BIOS Setup Utility.
► Select the Save Changes & Exit option under Exit.
The notebook will reboot. The system is no longer password-protected.
56
"Setting supervisor and user HDD password", Page 55), you
Fujitsu