Advertisement
Flashing
LAN1-4
ON
Rear Panel
Rear Panel Port and Button Definition
Connector
12V DC
Power connector with 12V DC, 1.0A.
Press more than 3 seconds for reset to factory
RESET
default setting.
Router is successfully connected to a device through
the corresponding port (1, 2, 3, or 4). If the LED
LAN (1-4)
light of LNK/ACT is flashing, the Router is actively
sending or receiving data over that port.
WPS
WPS on or off switch.
WAN
One Fiber-optic Interface, SC or SFP connector-type.
Data is being transmitted or received via the
corresponding LAN port
The port is up
FRT-401N / FRT-401NS15
FRT-405N
Description
Advertisement
