Table of Contents
Advertisement
Appendix A2. Default Values and Allowable Values
The table below provides details about provisioning parameter tags, their allowable values, and the
device default values. Since some of the parameters contain variables, they are represented by "%d".
The Notes section below describes details of the various usages of this variable %d.
Note: Please refer to your appendix section for your factory default.
NOTES for usage of variable %d:
1. The device allows up to 3 DDNS servers. With %d usage, the device can be configured to use
more than 1 DDNS services. Allowed range values are from 1, 2 or 3.
2. The device allows up to 3 DNS servers. With %d usage, the device can be configured to use more
than 1 DNS servers. Allowed range values are 1, 2, or 3.
3. The network parameter names starting with "Network.Interface.%d" allows defining the type of
network interface to use. The %d with value of 2 is defined for USB. Value 1 is reserved.
4. The line setting parameter names starting with "VoipConfig.LineSetting.%d" allows defining the
port the value will be set for. In a single port device, it will always be 1. For a two port device, the
allowable values will be 1 or 2.
5. There are two %d variables for these parameters. The first %d defines the profile to use. There
are up to 4 profiles that can be configured with allowable values of 1 to 4. The second %d is for
codec preference usage with allowable values of 1 through 6, where preference 1 is highest
preference and 6 is lowest.
6. The profile setting parameter names starting with "VoipConfig.ProfileSetting.%d" allows defining
the profile that can be configured with allowable values of 1 to 4. Please ensure you have a
"VoipConfig.ProfileSetting.%d.profileID" tag with a value of 1, included in your Provisioning
Configuration even if you are using only one profile.
7. The device allows up to 3 SNTP servers. With %d usage, the device can be configured to use more
than 1 SNTP servers. Allowed range values are 1, 2, or 3.
Network:
Prov Tag
Network.DDNS.%d.CheckInterval
Network.DDNS.%d.DomainName
Network.DDNS.%d.Enable
Network.DDNS.%d.ForceInterval
Network.DDNS.%d.Password
© 1998-2014 InnoMedia, Inc. All rights reserved.
InnoMedia MTA8328-1U Administrative Guide
Allowable Values
1 to 20 minutes
String
0=Disabled, 1=Enabled
1 to 7 days
String
Default Values
Note
15
1
Blank
1
0 - Disabled
1
3
1
Blank
1
Page 72
Advertisement
Table of Contents
