Table of Contents
Advertisement
5.9 SNMP Setting
Configuring the SNMP server information for the MTA to send traps to or to get commands from the
SNMP server.
Field Name
SNMP Manager
SNMP Community
Name #1
SNMP Community
Name #2
5.10 Trace Log
5.10.1 Trace Log Setting
Configure the MTA device to display debugging messages according to the level parameters. Note: Trace
Level "LOG_DEBUG" will have performance impacts on the MTA device. It is recommended to use this
feature only when debugging is needed.
© 1998-2014 InnoMedia, Inc. All rights reserved.
InnoMedia MTA8328-1U Administrative Guide
Figure 41. SNMP Setting
Description
IP address of the SNMP Manager system.
Write
Read and Write
Figure 42. Trace Log Setting
Prov Tag
System.SNMP.M
anager
System.SNMP.P
ublicCommunit
yName
System.SNMP.P
rivateCommuni
tyName
Page 60
Advertisement
Table of Contents
