InnoMedia MTA8328-1U Administrator's Manual page 33

Table of Contents

Advertisement

Call Transfer
Call ID Display
Call ID Block
Call Parking
Call Retrieve
Do Not Disturb On
Do Not Disturb Off
Play My IP Addr
Speed Dialing
Second Dial Tone
Prefix
© 1998-2014 InnoMedia, Inc. All rights reserved.
InnoMedia MTA8328-1U Administrative Guide
The service code to perform transferring the
current call to another destination.
The service code to display the incoming
caller phone number and its display name.
The service code to hide the outbound caller
phone number and its display name.
The service code to allow a person to put a
call on hold at one phone set and continue
the conversation from any other phone set.
The service code to allow a user to retrieve
the parked call.
The service code of "Do Not Disturb-On,"
preventing incoming calls from ringing the
phone.
The service code of "Do Not Disturb-Off"
allowing incoming calls to ring the phone.
When a phone is connected to the MTA, and
this service code is dialed, the current IP
address will be played out to the phone.
Enter a prefix to use with the Speed Dialing
Settings under the Port Config section. For
example if you configure a #9 in this setting,
to dial Speed Dialing Settings 0 phone
number, you would simply dial a
#90. Ensure the Prefix and Speed Dialing
Settings don't cause a dialing conflict with
other features such as Call Transfer and Call
ID Display.
When the number entered is dialed, it will
play secondary dial tone and the user is able
to enter a regular number to dial out. Note:
Number will be sent to the SIP server. eg.
9,(xxx)xxx-xxxx.
VoipConfig.Pr
ofileSetting.
%d.CFStrCXFR
VoipConfig.Pr
ofileSetting.
%d.CFStrCIDDi
splay
VoipConfig.Pr
ofileSetting.
%d.CFStrCIDBl
ock
VoipConfig.Pr
ofileSetting.
%d.CFStrCallP
ark
VoipConfig.Pr
ofileSetting.
%d.CFStrCallR
etrieve
VoipConfig.Po
fileSetting.%
d.CFStrNoDist
urbOn
VoipConfig.Pr
ofileSetting.
%d.CFStrNoDis
turbOff
VoipConfig.Pr
ofileSetting.
%d.CFStrMyIP
VoipConfig.Pr
ofileSetting.
X.CFStrSpeedD
ial
VoipConfig.Pr
ofileSetting.
%d.SecondDial
toneNum
Page 33

Advertisement

Table of Contents
loading

Table of Contents