InnoMedia MTA8328-1U Administrator's Manual page 58

Field Name
Enable EMS
Device Type (0-
254)
EMS Server
Password
Local EMS Port
Region ID
© 1998-2014 InnoMedia, Inc. All rights reserved.
InnoMedia MTA8328-1U Administrative Guide
Figure 40. Configuring EMS Server Information
Description
This enables the EMS feature.
This is the device type configured on the
EMS Server, so that a user of the EMS server
will see the device by name (such as 8328-1)
in the device list. The type is also important
for what options/features will be seen when
a device is queried on the EMS.
The IP or FQDN address of the EMS Server
and port. Default is to use port 5200 for
connection to the server.
The password for EMS Server.
The port number used at MTA device in
order to connect to EMS server.
Region the device is assigned to. This is a
number value that has to be entered, so a
good example of region configuration might
be based on Area Codes. Another example
might be time zones. When the EMS Server
is set up, careful consideration should be
given to how the regions are defined.
Prov Tag
System.EMS.En
able
System.EMS.De
vType
System.EMS.Se
rver
System.EMS.Pa
ssword
System.EMS.Po
rt
System.EMS.De
vRegion
Page 58