Trust 450L Manual

MI-2450E Optical Combi Mouse
First-time use – procedure in brief
1. Connection
2. De-install old drivers and products
3. Install under Windows
4. Post-installation check
1 Introduction
This manual is intended for users of the 'TRUST 450L MOUSE OPTICAL'. The
mouse is suitable to both a PS/2 and a USB port. This mouse has 5 buttons. Of the 5
buttons, 4 can be specially programmed by means of the accompanying software.
2 Safety
Before use, first read the following directions carefully:
- The TRUST 450L MOUSE OPTICAL needs no special maintenance. To clean the
mouse, simply use a lightly moistened, soft cloth.
- Never use aggressive chemicals such as gasoline or turpentine for cleaning.
These can damage the material the product is made of.
- On no account should the equipment be submerged in any liquid. This will damage
the product. Do not use this equipment in the proximity of water.
- Make sure that the cable is free of obstruction and heavy objects. Do not use this
equipment anywhere that the cable can become worn or damaged by people
walking over it.
- Do not attempt to repair the product yourself. By opening this equipment, you can
come into contact with electrically charged parts.
- In the following cases, you should let qualified personnel repair the equipment
- the cable or the plug are damaged or worn.
- the equipment has been in contact with rain, water or other liquids.
3 Approval
- This product complies with all essential requirements and other relevant
stipulations of the pertinent European directives. The Declaration of Conformity
(DoC) is available on www.trust.com/13681
4 Software installation under Windows 98 /
Me / 2000 / XP
This section describes how the mouse should be connected to the USB or PS/2 port,
how the software should be installed, and how to check the installation.
4.1 Connection
The mouse can be used on either the PS/2 or the USB port of your computer. It is
recommended to use the PS/2 port of your computer, if this port is present. This way
you keep a USB port free, which you can use to attach other USB equipment.
4.1.1 Via PS/2 port
This section describes how to connect the mouse to the PS/2 port. In order to
connect the mouse to the PS/2 port, you will need to use the green adapter provided
[USB → PS/2].
1. Make sure the computer is switched off.
2. Connect the PS/2 plug of the mouse to the PS/2 socket of the computer.
3. Turn the computer on.
(TRUST 450L MOUSE OPTICAL)
Section
(4.1)
!
U K
(4.2)
(4.3)
(5)
1