Table of Contents
Advertisement
Status LEDs and Buttons
Table 3-2
Rear Panel LEDs, Definitions of States (continued)
LED Name
3
Optional mLOM 10-Gb SFP+
(there is a single status LED)
3
Optional mLOM 10-Gb BASE-T
link speed
3
Optional mLOM 10-Gb BASE-T
link status
4
1-Gb Ethernet dedicated
management link speed
5
1-Gb Ethernet dedicated
management link status
6
1-Gb Ethernet link speed
7
1-Gb Ethernet link status
8
Unit Identification
Cisco UCS C240 M4 Server Installation and Service Guide
3-6
State
•
Off—No link is present.
•
Green, steady—Link is active.
•
Green, blinking—Traffic is present on the active link.
•
Off—Link speed is 10 Mbps.
Amber—Link speed is 100 Mbps/1 Gbps.
•
Green—Link speed is 10 Gbps.
•
Off—No link is present.
•
•
Green—Link is active.
•
Green, blinking—Traffic is present on the active link.
•
Off—Link speed is 10 Mbps.
•
Amber—Link speed is 100 Mbps.
Green—Link speed is 1 Gbps.
•
Off—No Link is present.
•
Green—Link is active.
•
Green, blinking—Traffic is present on the active link.
•
•
Off—Link speed is 10 Mbps.
•
Amber—Link speed is 100 Mbps.
•
Green—Link speed is 1 Gbps.
Off—No link is present.
•
Green—Link is active.
•
Green, blinking—Traffic is present on the active link.
•
Off—The unit identification function is not in use.
•
Blue—The unit identification function is activated.
•
Chapter 3
Maintaining the Server
OL-32474-01
Advertisement
Table of Contents
