Safety And Instructional Decals - Toro 74523 Operator's Manual

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area of potential
danger. Replace any decal that is damaged or lost.
1. Warning—read the Operator's Manual for instructions on
torquing the blade bolt/nut to 115 to 149 N∙m (85 to 110
ft-lb).
Battery Symbols
Some or all of these symbols are on your battery
1. Explosion hazard
2. No fire, open flame, or
smoking.
3. Caustic liquid/chemical
burn hazard
4. Wear eye protection
5. Read the Operator's
Manual.
1. Warning—do not touch the hot surface.
93-7818
6. Keep bystanders a safe
distance from the battery.
7. Wear eye protection;
explosive gases can
cause blindness and other
injuries
8. Battery acid can cause
blindness or severe burns.
9. Flush eyes immediately
with water and get medical
help fast.
10. Contains lead; do not
discard.
106-5517
1. Read the Operator's
Manual.
2. Read the instructions
before servicing or
performing maintenance.
Manufacturer's Mark
1. Indicates the blade is identified as a part from the original
machine manufacturer.
1. Read the Operator's
Manual.
8
112-3858
3. Remove the ignition key
before adjusting the height
of cut.
4. Height-of-cut settings.
116-8775
2. Fill to bottom of filler neck;
warning—do not overfill
the tank.