Product Overview; Controls - Toro 74523 Operator's Manual

Product Overview

1. Adjustable caster
2. Accessory-frame lock
3. Anti-scalp roller (60-inch
decks only)
4. Front caster wheel
5. Side-discharge chute
6. Accessory frame
7. Engine

8. Controls

Figure 4
9. Control levers
10. Hydraulic tank
11. Fuel tank
12. Platform (down position)
13. Fuel-shutoff valve
14. Battery
15. Mower deck
Controls
Become familiar with all the controls before you start the
engine and operate the machine
1. Fuel cap
2. Malfunction-indicator light
(MIL)
3. Parking-brake lever
4. Hydraulic-tank cap
5. Hour meter
6. Ignition switch
7. Throttle control
Electronic-Control Unit
Malfunction-Indicator Light
The electronic-control unit (ECU) continuously monitors the
operation of the EFI system.
If a problem or fault within the system is detected, the
malfunction-indicator light (MIL) is illuminated
The MIL is the red light located in the console panel.
When the MIL illuminates, make initial troubleshooting
checks.
If these checks do not correct the problem, further diagnosis
and servicing by an Authorized Service Dealer is necessary.
Hour Meter
The hour meter records the number of hours the engine has
operated. It operates when the engine is running. Use these
times for scheduling regular maintenance
12
(Figure 5).
Figure 5
8. Height-of-cut lever
9. Height-of-cut pin
10. Platform latch
11. Right motion-control lever
12. Blade-control switch
(PTO)
13. Left motion-control lever
(Figure
(Figure 5).
5).