Before You Begin; Required Tools - Razor A-Type Owner's Manual

BEFORE YOU BEGIN

BEFORE YOU BEGIN
Remove contents from box. Inspect the contents of the box for scratches and/or dents that may have occurred during
shipping. Because your scooter was partially or fully assembled and packed at the factory, there should not be any
problems, even if the box has a few scars or dents.
T-bar
Collar clamp

Required Tools

5 mm
Allen wrench
(select models)
Quick-release lever
(select models)
Extension tube
(select models)
Joint release lever/
pivoting mechanism
(select models)
Brake
Steering column adjusting screw (A4 only)
WARNING:
DO NOT USE NON-RAZOR
PRODUCTS WITH YOUR
SCOOTER. Razor scooters have
been built to certain Razor design
specifications. The original
equipment supplied at the time
of sale was selected on the basis
of its compatibility with the
frame, fork and all other parts.
Certain aftermarket products may
not be compatible and will void
the warranty.
Product ID Locations:
1. Side of deck plate
2. Box - side of UPC (not shown)
Box Contents:
• Scooter
• Allen wrench (select models)
• Owner's manual