Taking Pictures With The Touched Area In Focus (Touch Af Area Selection) - Panasonic Lumix DMC-FP3 Operating Instructions Manual

Taking pictures with the Touched Area in Focus
(Touch AF Area Selection)
Recording Mode:
You can adjust the focus to the place on the screen you touch.
displayed
●
Touch AF Area Selection may not be effective in the following cases.
• When the subject is too small
• When the subject is moving quickly
• When there are other subjects or a background of similar color as the subject
• When the camera is shaking
●
If Touch AF Area Selection fails, the AF area blinks red and then goes out. Try touching
the screen again.
●
If Touch AF Area Selection does not work, [AF MODE] will record with
focusing).
●
During [INTELLIGENT AUTO] Mode, the camera will determine the touched subject to
be the optimal scene.
●
Touch AF Area Selection will not work in the following cases.
• Scene Modes [STARRY SKY], [FIREWORKS]
• Motion Picture Recording Mode
40
VQT2P49
Touch the subject
• When the subject is recognized, the AF area
is displayed and the camera focuses.
• If is touched, Touch AF Area Selection is
canceled.
• Focusing may not work if you touch the
edge of the screen.
Take a picture
Press halfway
(press lightly and focus)
• When the recording place is too dark
• When using zoom
Press fully
(press the button all
the way to record)
(1-area