Picture Save Destination (Cards And Built-In Memory); Remaining Battery And Memory Capacity - Panasonic Lumix DMC-FP3 Operating Instructions Manual

Inserting and removing the card (optional)/
the battery

Picture save destination (cards and built-in memory)

Pictures will be saved to a card if one is inserted, or to the built-in memory
■
Built-in memory (approx. 40 MB)
●
Pictures may be copied between cards and the built-in memory (→77).
●
The access time for the built-in memory may be longer than the access time for a card.
●
[QVGA] in [REC QUALITY] only can be available to record motion pictures in the built-in memory.
■
Compatible memory cards (optional)
The following SD standard-based cards (Panasonic brand recommended)
Type of Card
SD memory
cards
SDHC memory
cards
SDXC memory
cards
●
Please reformat the card with this camera if it has already been formatted with a
computer or another device. (→22)
●
If the write-protect switch is set to 'LOCK', the card cannot be used to record or delete
pictures, and it cannot be formatted.
●
It is recommended that you copy important pictures to your computer (as
electromagnetic waves, static electricity, or faults may cause data to be damaged).
●
Latest information:
http://panasonic.jp/support/global/cs/dsc/ (This Site is English only.)
Pictures remaining (→96)
When in operation
(Card) or
This means that an operation is in progress, such as the recording, reading, deleting,
or formatting of pictures. Do not turn off the power or remove the battery, card, or AC
adaptor (optional) (this may cause damage to or loss of data).
Do not subject the camera to vibrations, impact, or static electricity. Should any of these
cause camera operation to be terminated, attempt to perform the operation again.
12
VQT2P49
(Continued)
Capacity
8 MB – 2 GB • Can be used with devices compatible with
the respective formats.
• Before using SDXC memory cards, check
4 GB – 32 GB
that your computer and other devices
support this type of card.
48 GB – 64 GB
http://panasonic.net/avc/sdcard/information/
SDXC.html
• Cards in capacities not listed at left are not
supported.

Remaining battery and memory capacity

Remaining battery (only when using battery)
If the battery mark flashes red, recharge or replace battery. (→9)
Displayed when no card inserted (pictures will be saved to built-in memory)
(Built-in memory) are illuminated red.
Notes
(flashes red)
if not.
Switch (LOCK)