Setting the clock
■
To set local time at travel
destination
[WORLD TIME] (→54)
Touch [CLOCK SET] from the [SETUP] menu to change the clock settings.
• Clock settings will be saved for approx. 3 months even after battery is removed,
provided a fully-charged battery was installed in camera for the 24 hours beforehand.
Touch [CLOCK SET] from the
menu (→18)
Set the date and time (steps
●
Failure to set the date and time will cause the date/time to be improperly printed when
printing pictures in digital photo center or when using [TEXT STAMP].
●
Year can be set between 2000 and 2099.
●
After the time has been set, the date can be printed correctly even if the date is not
displayed on the camera screen.
14
VQT2P49
(Continued)
Touch [SET]
Touch [SET]
• To return to the previous screen
→ Touch [CANCEL]
• Turn on power again and check time
display.
(Time and date can be displayed by
pressing [DISPLAY] several times.)
To change time setting
and
[REC] menu or
) (→13)
[SETUP]