Touch screen calibration
Perform the touch screen calibration if a different
object to the one touched is selected.
1
Select the menu. (l 29)
[SETUP] # [CALIBRATION] # [YES]
≥ Touch [ENTER].
2
_
Touch the [
] with the supplied
stylus pen and enter in
calibration.
≥ Touch the [_] in the order it is displayed.
(5 locations)
3
Touch [ENTER].
≥ Calibration cannot be performed when the LCD
monitor is turned 180o.
Recording Yourself
¬ Change the mode to
Rotate the LCD monitor towards the
lens side.
≥ The image is horizontally flipped as if you see
a mirror image. (However the image recorded
is the same as a normal recording.)
≥ Only some indications will appear on the
screen. When ° appears, return the direction
of the LCD monitor to normal position and
check the warning/alarm indication. (l 122)
.
37
VQT2H52