Panasonic HDC-SD10PP Operating Instructions Manual page 32

[ALERT SOUND]
Touch screen operation, starting and
stopping of recording and power on/off can
be confirmed with this sound.
2 Beeps for 4 times
When an error occurs. Check the sentence
displayed on the screen. (l 122)
[POWER LCD]
[LCD SET]
[COMPONENT OUT]
[HDMI RESOLUTION]
[VIERA Link]
[TV ASPECT]
[INITIAL SET]
Set to [YES] for changing the menu settings
back to the default condition.
(Settings for [MEDIA SELECT]
[CLOCK SET] and [LANGUAGE] will not be
changed.)
*3
[FORMAT CARD]
[FORMAT Built-in Memory]
[CALIBRATION]
32
VQT2H52
(l 36)
(l 36)
(l 93)
(l 93)
(l 94)
(l 92)
*2
,
(l 89)
*4
(l 89)
(l 37)
[DEMO MODE]
This item is used to start the unit
demonstration.
(Only when the mode is at the
position)
If [DEMO MODE] is switched to [ON] when
there is no SD card inserted, the
demonstration automatically starts.
/
If [DEMO MODE] is switched to [ON] when
there is no SD card inserted and while this
unit is connected to the AC adaptor, the
demonstration automatically starts.
If any operation takes place, the
demonstration is canceled. However if no
operations take place for approx.
10 minutes, the demonstration
automatically starts again. To stop the
demonstration, set [DEMO MODE] to [OFF]
or insert an SD card.
[O.I.S. DEMO]
This item is used to start the optical image
stabilizer demo.
(Only when the mode is at the
position)
If [O.I.S. DEMO] is switched to [YES], the
demonstration automatically starts.
When you touch [EXIT], the demonstration
will be canceled.
[LANGUAGE] (l 30)