Cleaning And Care; Unsuitable Cleaning Agents - Miele H6200BM(TB) Operating And Installation Instructions

Speed oven
Table of Contents

Advertisement

Cleaning and care

Danger of burns!
Make sure the heating elements are
turned off and allowed to cool
completely.
Danger of injury! The steam from
a steam cleaner could reach
electrical components and cause a
short circuit.
Do not use a steam cleaner to clean
this appliance.
All surfaces can discolor or be
damaged if unsuitable cleaning
agents are used. The front of the
oven, in particular, will be damaged
by oven cleaners and descalers.
All surfaces are susceptible to
scratches. Scratches on glass
surfaces could cause a breakage.
Remove any cleaning agent residues
immediately.
Stubborn soiling may damage the
oven.
Once the oven has cooled clean the
oven, the inside of the door and the
door seal. Waiting too long to clean
the oven will make if much more
difficult to clean.
Check the door and door seal for
any sign of damage. If any damage
is seen, the oven should not be used
again. Contact Miele.
86

Unsuitable cleaning agents

To better maintain your appliance avoid
the following:
– Cleaners containing soda, ammonia,
thinners, or chlorides
– Cleaners containing descaling agents
or lime removers
– Abrasive cleaning agents (e.g.,
powder or cream cleansers, pumice
stones)
– Solvent-based cleaners
– Stainless steel cleaners
– Dishwasher cleaners
– Glass cleaning agents
– Ceramic cooktop cleaners
– Hard, abrasive brushes or sponges
(e.g. pot scrubbers or scrub
sponges, sponges which have
previously been used with abrasive
cleaning agents)
– Eraser sponges
– Sharp metal scrapers
– Steel wool
– Stainless steel spiral pads
– Spot cleaners
– Oven cleaners*
* These can, however, be used to
remove very heavy soiling from
PerfectClean treated surfaces.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents