Test Mode - Pioneer DV-515 Service Manual

2. TEST MODE

2.1 HOW TO ENTER THE TEST MODE
There is the two following methods in an enters of the test mode.
1. Input [ESC] key and [TEST/RANDOM] key of the LD test mode
remote control unit in order under the power on condition.
2. Connect a personal computer with the RS232C terminal
(CN106), and input entry command (TE) of test mode from the
personal computer.
Note: FL indication and LED come all to light until key operation
is done when entering the test mode.
2.3 LIST OF TEST MODE FUNCTION
Contents of Command
Open
Close
Stop
Play (DVD is only tracing.)
Increase the address
(at FTS coefficient indication mode)
Play (DVD is with decode.)
Pause on
Decrease the address
(at FTS coefficient indication mode)
Pause on/off
Search address input (0 to 9)
∗ Use for other numerical value input
Search address input (A to F)
1 Search address clear
2 Escape the search input mode
Change the search address input mode
(Off=absolute address=addition=subtraction=Off)
∗ Use for other numerical value input
Search execution (ignore the wrong address)
Tracking open
Tracking close
Slider in
Low speed scan REV
Scan REV (Jump number is variable)
Slider out
Low speed scan FWD
Scan FWD (Jump number is variable)
Loading in
Loading out
LD on (650 nm)
2.2 RELEASE THE TEST MODE
There is the three following methods in a release of the test mode.
1. Turn the power off.
2. Press [ESC] key of the remote control unit. At this time, reset it
for a while except for during the LD and CDV set.
3. Connect a personal computer with the RS232C terminal
(CN106), and input normal mode entry command (NE) from
the personal computer.
Key Name of
Condition
Remote Control Unit
STOP REPEAT A
OPEN REPEAT A
PLAY REPEAT B
STOP TV/LDP
–––––
STOP PLAY
PLAY CX
–––––
PLAY/PAUSE PAUSE
0 to 9
During address input PGM+1 to 6
During address input CLEAR
Address = 0
+10
CHP/TIM
PLAY STEP FWD
PLAY STEP REV
TR : Off SCAN REV
Shuttle REV
TR : On SCAN REV
TR : On Shuttle REV
TR : Off SCAN FWD
Shuttle FWD
TR : On SCAN FWD
TR : On Shuttle FWD
STOP SKIP REV
STOP SKIP FWD
TEST+1
DV-515
Code of Remote
Control Unit
A8 – 48
A8 – 48
A8 – 44
A8 – 0F
A8 – 17
A8 – 0E
A8 – 18
A8 – 00 to 09
A8 – 45
A8 – 1F
A8 – 13
A8 – 54
A8 – 50
A8 – 11
A8 – 2C to 2F
A8 – 11
A8 – 2C to 2F
A8 – 10
A8 – 28 to 2B
A8 – 10
A8 – 28 to 2B
A8 – 53
A8 – 52
A8 – 5E + A8 – 01
7