Test Mode Screen Display - Pioneer DV-515 Service Manual

2.7 TEST MODE SCREEN DISPLAY

Consecutive double-OSD display is supported during test mode. The screen is composed 10 lines with a maximum of 32 characters per line.
It can't be used with the debugging display mode together. Screen display contents including the CLD model.
• Screen Composition
Address
Tilt error value, Tilt servo status
Tracking status
Spindle status and AFB status
AGC setting
FTS servo IC information
C1 error value of CD and DVD
Internal operation mode of
the mechanism control
Disc judgment and
CD 1/3 beam switch
Pickup
Caution :
The first screen and second screen switch by
pressing [DISPLAY] key of the remote control
unit.
It is only a version display part on the lower
right of the screen those contents of display
change.
ATB : ON/OFF information display and AGC
manual setting display deleted with the second
generation.
• Description of Each Item on the Display
(1) Address indication
The address being traced is displayed in number.
DVD : ID indication (hexadecimal number, 8 digits)
CD/LD (CLV) : A-TIME (min. sec.) [ 0 0 0 0 ∗ ∗ ∗ ∗ ]
LD (CAV) : FRAME
(Note : For DVDs, decimal-number indication is possible.)
(2) Code indication of the remote control unit
[R – ∗ ∗ ∗ ∗]
The code for the key pressed on the remote control unit, which is
received by the FL controller, is displayed while the key is pressed.
In the case of the double code, the second code will be displayed.
(3) Key code indication for the main unit [K – ∗ ∗ ]
The code for the key pressed on the main unit, which is received by
the system controller, is displayed while the key is pressed.
(4) Tilt error value, Tilt servo status [TILT – ∗ : ∗ ∗ ∗]
Tilt error value :
Tilt servo status :
Tilt neutral
Tilt servo on
Tilt servo off
Character in bold : Item name
: Information display
First screen display
Second screen display (at lower right portion of the screen)
[ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ]
[ 0 0 0 ∗ ∗ ∗ ∗ ∗ ]
[0] to [F]
[N ]
[ON ]
[OFF]
FL controller version
Control and part numbers of GUI-ROM
Part No. of flash ROM and system controller
Part No. of DVD mechanism controller
Part No. of CLD mechanism controller
(5) Tracking status [TRKG – ∗∗∗]
Tracking on
Tracking off
(6) Spindle status [SPDL – ∗ ∗ ∗]
Spindle accelerator and brake
FG servo
Rough, velocity phase servo
Offset addition, rough, velocity phase servo
(7) Mechanism position value [M – ∗]
Position code
(8) Slider position [S – ∗ ∗ ∗ ∗]
CD TOC area
CD active area
CDV video area
LD active area
Side B inside
(9) AGC setting [AGC – ∗ ∗] [ ∗ ]
AGC on
AGC off
RF AGC on
RF AGC off
DV-515
Remote control code
Key code
Mechanical position value
Slider position
Output video system
AV1 chip version and
Flash ROM size
FL controller destination setting,
Region setting for the player
Flash ROM version
System controller revision
DVD mechanism controller revision
AV-1 chip version
CLD mechanism controller revision
[ON ]
[OFF]
[A/B]
[FG]
[SRV]
[O_S]
[0] to [8]
[IN ]
[CD ]
[CDV]
[LD ]
[B IN]
[AGC-ON]
[AGC-OFF]
[1]
[0]
13