Adjusting Lcd Monitor/ Viewfinder - Panasonic HDC-DX1 Operating Instructions Manual

Adjusting LCD monitor/
viewfinder
Adjusting the brightness and
colour level
1
Press the MENU button, then
select [SETUP]
[EVF SET] [YES] and press the
#
cursor button.
2
Move the cursor button up or
down to select the item to be
adjusted. Then, press the centre
of the cursor button to set and
then move the cursor button left
or right to make the adjustment.
The bar display moves.
≥After adjustments are made if no operations
are performed for about 2 seconds, the bar will
disappear.
≥Press the MENU button to exit the menu
screen.
[LCD SET]
[BRIGHTNESS]: Brightness of the LCD monitor
[COLOUR]: Colour level of the LCD monitor
[EVF SET]
[BRIGHTNESS]: Brightness of the viewfinder
≥To adjust the brightness of the viewfinder,
close the LCD monitor and extend the
viewfinder to activate it.
≥When the LCD monitor is rotated by 180°
towards the lens, the brightness and colour
level of the LCD monitor cannot be adjusted.
≥These settings will not affect the images
actually recorded.
[LCD SET] or
#
ª In order to increase the
brightness of the entire LCD
monitor
Press the POWER LCD button.
The [ ] indication appears on the LCD
monitor.
≥Press the POWER LCD button if the
surroundings are bright and the LCD monitor is
difficult to see. The entire LCD monitor will
become approx. twice as bright as usual.
≥When the POWER LCD button is pressed
again, the [ ] indication disappears and the
original brightness is restored.
≥This will not affect the images to be recorded.
≥If you turn on the unit when the AC adaptor is
used, this function will automatically be
activated.
≥This function cannot be used in PC connection
mode.
Setup
POWER LCD POWER LCD
41
VQT1A15