Inserting/Removing A Disc - Panasonic HDC-DX1 Operating Instructions Manual

Setup
How to turn the power on and off
with the LCD monitor/viewfinder
When the mode dial is set to
be turned on and off with the LCD monitor and
the viewfinder.
ª To turn on the power
Open the LCD monitor or extend the
viewfinder.
The status indicator A lights and the power turns
on.
≥It lights up when the viewfinder is extended with
the LCD monitor closed. (When the LCD
monitor is opened, the viewfinder turns off.)
ª To turn off the power
Close the LCD monitor and retract
the viewfinder.
≥The status indicator A goes off and the power
turns off. The power will not turn off unless the
LCD monitor is closed and the viewfinder is
retracted.
≥The power will not turn off while recording
motion pictures even if the LCD monitor is
closed and the viewfinder is retracted.
Set the mode dial to OFF when this unit is not
being used.
30
VQT1A15

Inserting/removing a disc

When inserting or removing the disc, fit the
charged battery pack or connect the AC adaptor
, the power can
to the unit. The cover of the disc compartment
will not open unless the unit is powered.
1
2
A
3
A
Attach the battery or connect the
AC adaptor.
Slide the DISC EJECT lever once
and release it.
A few moments after the ACCESS/PC lamp
A blinks, the cover of the disc compartment
will open slightly.
Open the cover of the disc
compartment by hand and insert/
remove the disc.
A
ACCESS
/PC
DISC EJECT