Changing The Door Hinging - Miele KFN 9758 iD Operating And Installation Instructions

Changing the door hinging

Before installing the appliance, you will
need to decide on which side the door
is to be hinged. If left hand door
hinging is required, follow the
instructions below.
To change the door hinging, you will
need various sizes of Torx
screwdrivers, a slotted
screwdriver and a spanner.
^ Open both appliance doors.
^ Remove covers a, b and c and
caps d with a screwdriver.
^ Slightly loosen fixing screws e at the
top, middle and bottom of the
appliance.
^ Push each of the doors outwards and
take them off their hinges.
Downloaded from Fridge-Manual.com Manuals
50
^ Unscrew fixing screws e completely,
and loosely screw them in at the top,
middle and bottom on the opposite
side of the appliance.
If you have put locking pins into the
hinges to stop the door opening too far:
^ Remove the locking pins from the top
of the hinges.
To remove the soft-close mechanism
^ Place the doors with the outer side
downwards on a stable surface.
^ Open the hinges, and loosen the
screw in mounting a.
Warning. The soft-close mechanism
snaps shut when dismantled.
Danger of injury.