Miele KFN 9758 iD Operating And Installation Instructions page 59

Securing the appliance doors to the
furniture doors:
^ Drill pilot holes a and screw in the 4
x 14 mm screws b.
Make sure the two metal edges are
alligned (Symbol II).
– Align depth Z on the furniture door:
Loosen screws c at the top of the
appliance door, and loosen the
hexagon-headed screw d at the
bottom of the fixing bracket. By
moving the furniture doors, create a
gap of 2 mm between the furniture
doors and the front edge of the
housing unit.
Downloaded from Fridge-Manual.com Manuals
Building in the appliance
^ Close both of the doors, and align
them with the neighbouring furniture
doors.
^ Whilst counterholding adjusting bolts
g with a screwdriver, tighten nuts a
on the appliance doors with ring
spanner f.
^ Cover strip h must be completely
hidden in the niche, and must not
protrude.
^ Tighten all screws again.
^ Open the plastic bracket and secure
the appliance one more time using
screw i (4 x 19 mm) through the
rounhd hole in plastic bracket j.
^ Close the plastic bracket.
59