Table of Contents
Advertisement
Installing the appliance
A gap of 8 mm must be set between
the appliance door and the fixing
bracket.
Push fitting aids up to the height of
the furniture door: the lower edge X
of the fitting aids must be at the same
height as the upper edge of the
furniture door being fitted (see on
the diagram).
Undo nuts and take fixing
bracket off together with fitting
aids .
50
Using a pencil, lightly mark a line
down the centre of the inside of the
furniture door .
Hang fixing bracket with the fitting
aids onto the inside of the
furniture door.
Align the fixing bracket centrally.
Attach the fixing bracket securely
using at least 6 short chipboard
screws (4 x 14 mm). (On cassette
doors only use 4 screws on the
edges).
Pull the fitting aids upwards to
remove them .
Turn them around and fit them into
the middle slots on fixing bracket
for safe keeping.
Advertisement
Table of Contents
