Table of Contents
Advertisement
Installing the appliance
Use an allen key to unscrew both
front feet.
Tip: As soon as the feet have been
unscrewed slightly, you can adjust them
with a screwdriver at the bottom of the
foot (see small illustration).
Insert the piece of foam supplied.
The foam ensures the airflow
is separated to prevent
malfunctioning of the appliance.
Refit the plinth facing and pull it
forwards until the ventilation slats are
in alignment with neighbouring
furniture plinth facings.
Hold the plinth facing securely and
attach it to the right and left using the
bolts supplied .
If there is a continuous plinth facing in
the kitchen, a ventilation gap will need
to be made in it.
48
The ventilation grill must not be
covered.
Building-under
height
820 mm
870 mm
Dimension D
100 mm
150 mm
Advertisement
Table of Contents
