Washing Brush; Working With Detergent; Interrupting Operation; Finish Operation - Kärcher K 6.200 Original Instructions Manual

Hide thumbs Also See for K 6.200:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 15
Spray lance with pressure
regulation
Carrying out the most common clean-
ing tasks. The work pressure can be in-
finitely regulated between "Min" and
"Max".
Release the lever on the trigger
gun.
Turn the spray lance to the desired
position.
Spray lance with Dirtblaster
For particularly dirty items or areas.
Caution
Car tyres, paint or sensitive sur-
faces such as wood should not
be cleaned with the dirt blaster,
as there is a risk of damage.
Not suitable for use with detergents.
Optional

Washing brush

Suitable for use with detergents.

Working with detergent

Please use exclusively KÄRCHER de-
tergents and care products to carry out
the respective cleaning task, as these
were specifically developed for your
appliance. The use of other detergents
and care products may lead to prema-
ture wear and can invalidate your war-
ranty claims. Please obtain information
at your local dealer or request informa-
tion directly from KÄRCHER.
Illustration
Pull detergent suction hose as far
as is required out of the housing.
Suspend end of detergent suction
hose in a container filled with deter-
gent.
Use spray lance with pressure reg-
ulation (Vario Power).
Turn the spray lance to "Mix" posi-
tion.
Note: This will mix the detergent
with the water stream.
Recommended cleaning method
Spray the detergent sparingly on
the dry surface and allow it to react,
but not to dry.
Spray off loosened dirt with the high
pressure jet.
Optional
Foam nozzle
With powerful foam for effortless clean-
ing.
Fill the detergent solution in the de-
tergent tank of the foam nozzle (ob-
serve dosage instructions on the
packaging of the detergent).
Connect the detergent tank to the
foam nozzle.
Connect the foam nozzle to the trig-
ger gun.
Note: This will mix the detergent
with the water stream.

Interrupting operation

Release the lever on the trigger
gun.
Lock the lever on the trigger gun.
During longer breaks (more than 5
minutes), also turn the appliance off
using the "0/OFF" switch.

Finish operation

Caution
Only separate the high-pressure
hose from the trigger gun or the
appliance while there is no pres-
sure in the system.
After working with detergent, sus-
pend detergent suction hose in a
container filled with clear water,
switch the appliance on for around
1 minute once the spray lance has
been removed and rinse until water
runs clear.
– 10
EN
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

K 7.200

Table of Contents