Table of Contents
Advertisement
General Problems
Camera does not turn
off when the car is
turned off.
Video is unclear
Cross-stripe
interference in an
image
The camera crashes
Possible Solutions
• Check your vehicle's
owner's manual to verify
that you have connected
the camera to a power
outlet that only operates
when the key is in the ON
or ACC position.
• If you have connected your
camera accordingly and
it still remains on when
the car is turned off, go
to www.uniden.com for
assistance.
Ensure that there are no
fingerprints or dirt on the lens.
Ensure that the lens is always
kept clean.
Verify that Anti-flicker option
(Video/Anti-flicker) is set to
60Hz (North America). See
page 19.
Using a pin or an unfolded
paper clip, press and hold
the Reset button to reset the
camera. Turn the camera
back on.
37
Advertisement
Table of Contents
