Miele DA 186 Operating And Installation Instructions page 21

Height adjustment
^ Using the screws at the back of the
adjustable brackets, align the
rangehood height with that of
neighbouring units. Turn the screw
– anti-clockwise to raise the
appliance,
– clockwise to lower the appliance.
^ If necessary, adjust the depth again.
Securing the appliance to
neighbouring wall units or fitting side
panels
^ Remove the vapour canopy
^ Remove the grease filters. Secure the
rangehood to the neighbouring units,
or fit the side panels, using two
screws each side.
For the lower screws, first remove the
screw caps, and refit them
afterwards.
^ Refit the vapour canopy.
Installation
21