Miele DA 186 Operating And Installation Instructions page 20

Installation
^ The recirculation grille must be
removed when the hood is used in
extraction mode.
^ Hang the rangehood in position using
the adjustable brackets.
20
^ Position the vapour canopy with the
furniture door front fitted, and close it.
The movement of the vapour canopy
can be adjusted if necessary, for
instance where a heavy furniture door is
fitted. The adjusting screws are
accessed through openings on either
side of the appliance.
^ Remove both cover caps.
^ Using a cross-slotted screwdriver,
adjust both sides evenly:
- turn clockwise to tighten the
mechanism,
- turn anti-clockwise to loosen the
mechanism.
^ Then refit the cover caps.