Battery Setting1 - Panasonic AJ-SPC700 P Operating Instructions Manual

Chapter 8 Menu Description Tables
Items/ Adjustable
Data Saved Range
CARD NEAR ON Select whether or not to set the alarm
to beep for P2 CARD NEAR END
END ALARM OFF
ALARM.
– C U F –
CARD NEAR 2min Set the remaining time to indicate the
P2 CARD NEAR END TIME alarm.
END TIME 3min
– C U F –
CARD END ON Select whether or not to set the alarm
to beep for P2 CARD END ALARM.
ALARM OFF
– C U F –
CARD REMAIN/ 3min/ Set the length of time for one segment
( ) of the P2 card's remaining capacity
5min/
indicator bars.
3min/ : One segment represents 3
5min/ : One segment represents 5
– C U F –
114
Remarks
minutes.
minutes.
(continued)

8-6-2 BATTERY SETTING1

Items/ Adjustable
Data Saved Range
PRO14 Enable selection under BATTERY
SELECT.
•
:Enable selection.
• :Disable selection.
MANUAL Select auto or manual to set the NEAR
END voltage.
AUTO
MANUAL: Set voltage manually.
AUTO: Set voltage automatically.
11.0 When MANUAL is selected in the
above menu, set the NEAR END
:
13.9
voltage in 0.1 V steps.
:
15.0
– C U F –
TRIM14 Enable selection under BATTERY
SELECT.
•
:Enable selection.
• :Disable selection.
MANUAL Select auto or manual to set the NEAR
END voltage.
AUTO
MANUAL: Set voltage manually.
AUTO: Set voltage automatically.
11.0 When MANUAL is selected in the menu
above, set the NEAR END voltage in
:
13.6
0.1 V steps.
:
15.0
– C U F –
HYTRON50 Enable selection under BATTERY
SELECT.
•
:Enable selection.
• :Disable selection.
MANUAL Select auto or manual to set the NEAR
END voltage.
AUTO
MANUAL: Set voltage manually.
AUTO: Set voltage automatically.
11.0 When MANUAL is selected in the menu
above, set the NEAR END voltage in
:
13.1
0.1 V steps.
:
15.0
– C U F –
HYTRON100 Enable selection under BATTERY
SELECT.
•
:Enable selection.
• :Disable selection.
MANUAL Select auto or manual to set the NEAR
END voltage.
AUTO
MANUAL: Set voltage manually.
AUTO: Set voltage automatically.
11.0 When MANUAL is selected in the menu
above, set the NEAR END voltage in
:
13.2
0.1 V steps.
:
15.0
– C U F –
HYTRON120 Enable selection under BATTERY
SELECT.
•
:Enable selection.
• :Disable selection.
MANUAL Select auto or manual to set the NEAR
END voltage.
AUTO
MANUAL: Set voltage manually.
AUTO: Set voltage automatically.
11.0 When MANUAL is selected in the menu
above, set the NEAR END voltage in
:
13.1
0.1 V steps.
:
15.0
– C U F –
The ____ in the Adjustable Range column indicates the
preset mode.
Remarks