Components And Accessories; Table 1 Components And Accessories - Outback FX Series Installation Manual

Introduction

Components and Accessories

Components to be Installed
Battery Terminal Cover, red
Battery Terminal Cover, black
AC Plate
DC Cover (DCC) or Turbo Fan
Remote Temperature Sensor (RTS)
This plate is used for installations which do not utilize OutBack's
optional FLEXware conduit boxes. The knockouts are used to
NOTE: This plate is not to be connected to conduit.
Included in place of the DCC on sealed inverters. Convectively cools
chassis with the external OutBack Turbo Fan to allow maximum power.
NOTE: Do not install the Turbo Fan on a vented inverter.
NOTE: The DC Cover or Turbo Fan does not replace the battery terminal
covers. These covers must be installed in addition to the DCC or fan.
8
Table 1 Components and Accessories
AC Plate
install strain relief for flexible cable.
Turbo Fan Cover
Figure 2
Accessories Included
FX Mobile Series Installation Manual (this book)
FX Mobile Series Operator's Manual
"WARNING ELECTRICAL SHOCK" sticker
Silicone Grease Packet
DCC (DC Cover)
This covers the DC terminal area on vented inverters. The
DCC provides space to mount other components such as a
DC current shunt.
Battery Terminal Cover
These protect the terminals from accidental contact. They are
made of stiff plastic with a snap-on design.
Always keep covers installed during operation.
Components
900-0197-01-00 Rev A