Table of Contents
Advertisement
Chapter 2 Parts and their functions
Mode displays
W:
Lights when the 16:9 aspect ratio mode is established.
GPS:
Lights when signals cannot be received during GPS
operation.
GPS
: Lights when signals are being received during GPS
operation.
P-REC:
Lights in pre-recording mode and flashes during the time set
for pre-recording after the tally lamp for recording has
turned off.
iREC:
Lights during recording when the interval recording mode is
established; flashes during recording standby.
i:
Flashes when the interval recording mode has been
selected.
NDF
SLAVE HOLD W
CTL
VTCG TIME DATE P-iREC
h
Y
minM
s
TAPE
E
BATT
E
RF SERVO HUMID SLACK
Displays relating to the time code
NDF:
Lights when the time code is in the non-drop frame mode.
DF:
Lights when the time code is in the drop frame mode.
SLAVE:
Lights when the time code is locked externally.
HOLD:
Lights when the time generator/reader value is being held.
CTL:
Lights when CTL is selected by the DISPLAY switch and the
CTL count value is displayed.
TCG:
Lights when TC (or UB) is selected by the DISPLAY switch
and the TC (or UB) generator value is displayed.
TC:
Lights when TC (or UB) is selected by the DISPLAY switch
and the TC (or UB) reader value is displayed.
VTCG:
Lights when UB is selected by the DISPLAY switch and the
VIUB generator value is displayed.
VTC:
Lights when UB is selected by the DISPLAY switch and the
VIUB reader value is displayed.
TIME:
Lights when UB is selected by the DISPLAY switch and the
values of the hour, minutes and seconds in real time are
displayed.
DATE:
Lights when UB is selected by the DISPLAY switch and the
values of the year, month and day are displayed in real time.
No display: Remains off when UB is selected by the DISPLAY switch and
the real-time values of the hour and minutes in the time zone
are displayed.
Time counter display:
The time code, CTL, user's bit and real time are displayed.
<Note>
When UB has been selected by the DISPLAY switch, each time the HOLD
button is pressed, the setting is switched in the following sequence: VTCG
(VTC) > DATE > TIME > no display (time zone) > TCG (TC) and so on
repeatedly.
16
GPS
OVER
OVER
0
10
D
frm
20
B
30
F
40
OO
13
24
-dB
Time code-related switch settings and display
items
DISPLAY switch
TCG switch position
position
TC or CTL
SET
UB
CTL
F-RUN or R-RUN
TC
UB
Display item
Time code
User's bit
CTL
Time code
User's bit
Hide quick links:
Advertisement
Table of Contents
