Fiber Optic Ethernet Port Specifications; 10Base-Fl/100Base-Sx Ethernet Optical Specifications; Fast Ethernet (100 Mbps) Optical Specifications - Siemens RUGGEDCOM RX1500 Installation Manual

RUGGEDCOM RX1500
Installation Guide
f
Auto-crossover and auto-polarity.
g
RMS 1 minute.
Section 4.5

Fiber Optic Ethernet Port Specifications

The following sections detail fiber optic specifications for ports that can be equipped on the RX1500. The user
determines the type of optics at the time of ordering, and can determine the ports installed on a particular unit by
reading the factory data file via the ROX II user interface. The specifications are organized by order code. Module
order codes are contained within each unit when it is assembled and configured at the factory. For information
about obtaining factory configuration data, refer to the ROX II User Guide for the RX1500.
• Section 4.5.1, "10Base-FL/100Base-SX Ethernet Optical Specifications"
• Section 4.5.2, "Fast Ethernet (100 Mbps) Optical Specifications"
• Section 4.5.3, "Gigabit Ethernet (1 Gbps) Optical Specifications"
Section 4.5.1

10Base-FL/100Base-SX Ethernet Optical Specifications

Connector
Mode
Type
MM ST
Section 4.5.2

Fast Ethernet (100 Mbps) Optical Specifications

Fixed Fast Ethernet Transceivers
Connector
Mode
Type
MM ST
MM SC
MM MTRJ
MM MTRJ
Fiber Optic Ethernet Port Specifications
Cable Tx λ (typ.)
Type (µm) (nm)
62.5/125
820
50/125
Cable Tx λ (typ.)
Type (μm) (nm)
62.5/125
1300
50/125
62.5/125
1300
50/125
62.5/125
1300
50/125
62.5/125
1300
50/125
Tx min Tx max
Sensitivity
(dBm) (dBm)
(dBm)
-16 -9
-19.8 -12.8
Tx min. Tx max.
Sensitivity
(dBm) (dBm)
(dBm)
-19
-14
-22.5
-19
-14
-22.5
-19
-14
-22.5
-19
-14
-22.5
Technical Specifications
Rx Rx
Distance
Saturation
(typ.) (km)
(dBm)
-34 -11.2 2
Rx Rx
Distance
Saturation
(typ.) (km)
(dBm)
-31 -14 2
-31 -14 2
-31 -14 2
-31 -14 2
Chapter 4
Power
Budget
(dB)
18
14.2
Power
Budget
(dB)
12
8.5
12
8.5
12
8.5
12
8.5
41