Contents Introduction Plinth Fixing Spikes and Feet Setting Up 2 Channel Positioning AV Positioning Setting up the Bronze FX Fixing the Bronze FX to a wall Connecting Speaker Cables Bare Wire Connection Banana Plugs Wiring Single Wiring Bi-Wiring Bi-Amping Grilles Port bungs Owner Information monitoraudio.com...
Setting Up 2 Channel Positioning AV Positioning NOTE: When using 2 pairs of Bronze FX in a 7.1 system, you need to use the RIGHT hand speaker for the rear surround right and the LEFT hand speaker for the rear surround left. Your side surround speakers will then be set with the RIGHT speaker on the left wall and LEFT speaker on the right wall.
Setting up the Bronze FX NOTE: Before changing your Bronze FX’s from bi-pole mode to di-pole mode, please ensure Bi-Pole Bi-Pole Di-Pole Di-Pole RIGHT Bi-Pole Bi-Pole Di-Pole Di-Pole LEFT monitoraudio.com...
Page 8
Bi-Pole Bi-Pole Di-Pole Di-Pole RIGHT Bi-Pole Bi-Pole Di-Pole Di-Pole LEFT Bi-Pole Di-Pole LEFT Bi-Pole Di-Pole RIGHT Bi-Pole Di-Pole RIGHT Bi-Pole Di-Pole LEFT Bronze Series...
Wiring Single Wiring NOTE: When using this method you must kEEp the terminal links in place. LEFT RIGHT Bi-Wiring NOTE: When using this method the terminal links MUST be REMOvEd. LEFT RIGHT Bi-Amping NOTE: When wiring this method the terminal links MUST be REMOvEd. LEFT RIGHT LEFT...
Grilles Port bungs WARNING: Care must be taken not to insert the port bungs too far into the port, as this may result in the foam bung being lost inside the cabinet. What is Bass Boom? monitoraudio.com...
Need help?
Do you have a question about the Bronze 1 and is the answer not in the manual?
Questions and answers