LAST CLIP DELETE function
Assign LAST CLIP to any of the USER 1 – 3
buttons to enable a convenient way to delete the
last recorded clip.
Pressing the USER button to which LAST CLIP
was assigned displays a YES/NO confirmation
dialog on the screen.
Select YES, and the last recorded clip is deleted
and "LAST CLIP DELETE OK" is displayed.
•
Select NO to cancel clip deletion.
•
Clips cannot be deleted when a switch has been
made to the MCR or PC mode or the recording
format has been changed after completing a
recording. Then it will not be possible to delete
the clip by turning the power off and turning it
back on.
•
This button cannot be used to delete clips when
a P2 card (one of two inserted cards) has been
removed and reinserted after recording, nor can
it be used to delete clips on a write-protected P2
card.
•
In hot swap recording, the clip delete function is
not available unless all the P2 cards containing
data shot in one recording operation are inserted.
•
The YES/NO confirmation dialog does not appear
when the clip delete function is not available.