Samsung SNC-550 User Manual page 46

SNC-550 Network Camera
should be input precisely. To add device, click <Server Add>
button.
Please configure the group, name, IP, Password of device to be
registered and register to group list by clicking <Apply> button.
Adding remote device with dynamic IP address
Dynamic IP is mainly used in xDSL, cable modem and DHCP. If the
device uses line with dynamic IP and 'Use SWR' of Add server
window is not activated, as the IP address assigned can not be
known, it is not possible to connect from Viewer. To solve this
problem, SWR server is used.
If 'Dynamic IP' is selected on IP property section, IP input
column of below input section is inactivated and using SWR is
checked.
After Configuring and applying input information such as
group, name, MAC and Password as above, the device using
dynamic IP can be registered.
Note
42
SWR saves MAC address of connecting client with IP
information of remote device and allows connection.