Samsung SNC-550 User Manual page 26

SNC-550 Network Camera
⑩ NETWORK LED
LED lights ( green ) flash when the camera sends and
receives data by the network.
⑪ POWER INPUT TERMINAL
Connects to the power appropriate to each model.
⑫ AUTO IRIS LENS SELECTION SWITCH
Please change the mode to DC or VIDEO depending on
the type of auto iris lens being used.
⑬ ETHERNET
Can connect to 10/100 Mbps internet using the standard
RJ-45 connector. Can be powered by using a PoE(IEEE
802.3af) equipment.
Caution
⑭ ALARM
Alarm Input (I) : Connecting infrared sensors or other
external sensor equipment.
Alarm Output (O) : Connecting bright light, or other relay
equipment.
⑮ RS-485
Connecting serial cameras that perform Pan/ Tilt/ Zoom
functions.
22
When you connect SNC-550 network camera to
a POE equipment, the voltage on the LAN cable
may be high. So make a request an installation
and separation to the agency.