Setting The Calendar - Panasonic AG-HPG10P Operating Instructions Manual

Setting the calendar

The "CLOCK SET" value is recorded on the data content (clips), and it affects the sequence in which the
thumbnails are played back. Before recording, be absolutely sure to check the "CLOCK SET" and "TIME
ZONE" settings, and set them if necessary. Described below is the procedure for setting the clock to 5:20
PM on May 25, 2007.
1
Hold down [POWER] for at least 2 seconds
to turn the power on.
2
Press [MODE] to display the thumbnail
display off screen.
3
Press [MENU].
Basic operations on the setting menus. (page
70)
4
At the "TIME ZONE" item on the setting
menu "OTHER FUNCTION" screen, set the
time difference from Greenwich Mean Time
(GMT) using [STOP] and [PLAY] (page 78).
If the unit is going to be used in Japan, set to 9
hours ahead (factory mode) of GMT.
OTHER FUNCTIONS
PC MODE USB HOST
BEEP SOUND
CLOCK SET
TIME ZONE
POWER SAVE
LANGUAGE ENGLISH
SYSTEM FREQ 59.94Hz
USER FILE
PUSH MENU TO RETURN
5
Select "YES" at the "CLOCK SET" item
on the setting menu "OTHER FUNCTION"
screen.
OTHER FUNCTIONS
PC MODE USB HOST
BEEP SOUND
CLOCK SET
TIME ZONE
POWER SAVE
LANGUAGE ENGLISH
SYSTEM FREQ 59.94Hz
USER FILE
PUSH MENU TO RETURN
6
Press [FF] or [REW] to set "YEAR" to
"2007".
CLOCK SET
YEAR 2007
MONTH APR
DAY 24
HOUR 13
MIN 7
+/ - : PUSH
SEL : PUSH /
PUSH MENU TO RETURN
Any year from 2000 to 2030 can be set.
OFF
- - - -
+ 9:00
OFF
- - - -
OFF
- - - -
YES
OFF
- - - -
/
7
Press [STOP] to move the setting item to
"MONTH".
CLOCK SET
YEAR 2007
MONTH APR
DAY 24
HOUR 13
MIN 7
+/ - : PUSH
: PUSH /
SEL
PUSH MENU TO RETURN
8
Press [FF] or [REW] to set "MONTH" to
"MAY".
CLOCK SET
YEAR 2007
MONTH MAY
DAY 24
HOUR 13
MIN 7
+/ - : PUSH
SEL : PUSH /
PUSH MENU TO RETURN
9
Use the same method as in steps 4 and 5 to
set "DAY", "HOUR" and "MIN".
• The 24-hour clock system is used by this unit.
CLOCK SET
YEAR 2007
MAY
MONTH
DAY 25
HOUR 17
MIN 20
+/ - : PUSH
SEL : PUSH /
PUSH MENU TO RETURN
10
Press [MENU] 3 times to release the menu
mode.
• An error will occur in the time so check that
the time is correct before shooting.
• If the unit is going to be used overseas, do
not set the "CLOCK SET" item to the current
time but input the time difference from GMT
using the "TIME ZONE" item.
/
/
/
21