How To Use The Unit - Panasonic AG-HPG10P Operating Instructions Manual

How to use the unit

Housed in a compact cabinet which can be battery-powered, this Portable Memory Card Recorder comes
with two P2 card slots, a 3.5-inch LCD monitor, USB 2.0, IEEE1394, component signal, composite signal
and many other input/output signal connectors, and it can be easily operated to play back the data
content which has been shot by a P2 camera recorder. It is also capable of backup recording and file
management, and it supports P2 field recording.
Playing back data content
Playing back the data on the unit's LCD
1
monitor (page 42)
Data content (both pictures and sound) which has been shot on P2 cards using a P2 camera recorder can
be played back on the spot.
P2 camera recorder
Outputting the data to the external monitor
2
for playback (page 46)
The data content (both pictures and sound) which has been shot on P2 cards can be output to the external
monitor, and played back.
P2 card
Recording data on P2 cards
Simultaneous recording of data onto P2
3
cards (page 48)
When connected to a P2 camera recorder, the unit enables the data content being shot to be monitored on
the unit's display and the same data to be simultaneously recorded onto a P2 card.
The unit's recording start and stop operations can be performed from the camera recorder.
P2 camera recorder
8
P2 card
AG-HPG10 (this unit)
AG -HP G1
0
1394 cable
AG-HPG10 (this unit)
HD/SD-SDI output
Video output/
component output
AG-HPG10 (this unit)
AG -HP G1
0
AG -HP G1
0
External monitor
P2 card