Care And Maintenance - Comfort Glow ES5140 Important Instructions Manual

CARE AND MAINTENANCE

Cleaning
Always turn the heater OFF and unplug the power cord from the outlet before cleaning. Use a vacuum
soft, slightly damp cloth and buff with a dry cloth. Never use abrasive cleansers, liquid sprays, or any
cleaner that could scratch the surface.
break.
1. Under no circumstances should this product be operated with broken glass.
2. Do not strike or slam the glass.
3. Do not use abrasive cleaners to clean the glass.
4. This product uses tempered glass. Replacement of the glass supplied by the manufacturer
Light Bulb Inspection and Replacement
during shipping.
Light bulbs become very hot during use. Allow at least 10 minutes for the bulbs to cool
before touching.
on the back of the stove. Remove the screws and the panel. Check the bulbs to be sure they are
Do not operate this heater without the access panel in place. Do not remove the back cover of this
heater. There are no serviceable parts inside.
WARNING: Do not exceed 40 watts per bulb. Use of higher rated
Maintenance of Motors
Always disconnect the appliance from the main power supply and allow it to cool before any
servicing operation.
require no further lubrication. However, periodic cleaning/vacuuming of the appliance around the air
intake and exhaust, as well as the fan heater is recommended. For heavy or continuous use, periodic
cleaning must be done more frequently. If the heater blows alternating cold and warm air, check the
be turned off and the fan replaced immediately in order to prevent further damage to the unit.
9