Spraying - WAGNER Home Decor Owner's Manual

Spraying

h Spray Controls
There are two main controls that determine the width,
orientation or thickness of the spray pattern.
• Material flow control
• Air cap / pattern adjustment
1
2
Air cap ears
Air cap ears
3
English
6
note: For a video showing Home Décor Sprayer
spraying tips and best practices, visit
www.homedecorsprayer.com.
1. Adjust the material flow by turning the knob on the
rear of the spray gun.
Less paint
Tip: With practice, the material flow can also be
controlled by the trigger. The further the trigger pull,
the more material is sprayed and vice versa.
2. Adjust the spray pattern by turning the air cap ears.
Up / down motion
4-6" wide pattern
3 - 6 "
3. Practice your technique (use provided poster).
h Get closer. The spray gun should be 3-6 inches
(7-15 cm)
h Full passes. Spray the material in full passes, not
h Light coats. For a finer finish, coat lightly during
I II
=
=
C
=
=
D
= Side / side motion
=
4-6" tall pattern
For spraying large surfaces
(dressers or desktops)
away from the spray object.
short waves.
first pass, then cover completely on second pass.
III IIII
More paint
=
=
=
=
=
=
B A
Up/down or side/side
1-2" pattern diameter
For spraying narrow
surfaces (chair legs or
spindles)
© Wagner Spray Tech. - All Rights Reserved
=
C
=
B = A
D
=
=
=