Dv Automatic Recording (Dv Auto Rec); Recording Via Av3 Input - Panasonic DMR-BW500 Operating Instructions Manual

DV automatic recording (DV Auto Rec)

[HDD] [BD-RE] [BD-R] [RAM] [-R] [-RW‹V›] [+R] [+RW]
Preparation
1 Turn off the main unit and DV equipment, then connect the
equipment with the unit's DV input terminal (➡ 56).
2 Turn on the main unit.
≥When the output signal from the external equipment is NTSC,
change the "TV System" to "NTSC" in the Setup menu (➡ 87).
1
Turn on the DV equipment, and pause
play at the point you want recording to
start.
The following screen appears.
DV Auto Rec
Record from the DV unit?
Rec to HDD
Rec to BD/DVD
OK
RETURN
≥When the screen is not displayed
After performing step 1
1 Press [FUNCTION MENU].
2 Press [3, 4] to select "To Others" and press [OK].
3 Press [3, 4] to select "DV Auto Rec" and press [OK].
➡ Go to step 2
2
Press [3, 4] to select "Rec to HDD"
or "Rec to BD/DVD" and press [OK].
≥It may take a while for the next screen to display while
preparing to record.
3
Press [REC MODE] to select the
recording mode.
≥DR, FR mode cannot be selected.
4
Press [2, 1] to select "Start" and
press [OK].
Recording starts.
To stop recording
Press [∫].
[Note]
≥Only one piece of DV equipment (e.g., digital video camcorder) can
be connected to the unit via the DV input terminal.
≥It is not possible to operate the unit from the connected DV equipment.
≥The DV input on this unit is for use with DV equipment only. (It
cannot be connected to a computer, etc.)
≥The DV equipment name may not be shown correctly.
≥Depending on the DV equipment, the images or audio may not be
input properly.
≥The date and time information on the tape of the DV equipment will
not be recorded.
≥[-R] It may not be able to record after repeating about 30 times of
step 2 or recording or editing.
≥[+R] [+RW] Chapters for every 8 minutes are created automatically.
If the DV automatic recording function does not work properly,
check the connections and DV equipment settings, and turn the
unit off and back on.
If that does not work, follow the instructions for manual
recording (➡ 56).

Recording via AV3 input

[BD-RE] [BD-R] [RAM] [-R] [-RW‹V›] [+R] [+RW]
It is possible to record to disc from equipment connected to the AV3
input terminals.
Preparation
≥Press [DRIVE SELECT] to select the BD drive.
≥When the output signal from the external equipment is NTSC,
change the "TV System" to "NTSC" in the Setup menu (➡ 87).
1
While stopped
Press [FUNCTION MENU].
2
Press [3, 4] to select "To Others"
and press [OK].
3
Press [3, 4] to select "Recording via
AV3 input" and press [OK].
≥It may take a while for the next screen to display while
preparing to record.
Please set recording time.
Recording via AV3 input
Record in FR mode.
Max rec time
8 Hour 00 Min.
Set rec time
8 Hour 00 Min.
OK
RETURN
4
Press [2, 1] to select "Hour" and
"Min." and press [3, 4] to set the
recording time.
≥You can also set the recording time with the numbered
buttons.
5
Start play on the other equipment.
6
When you want to start recording
Press [2, 1] to select "Start" and
press [OK].
≥Record in FR mode.
To exit the screen without recording
Press [RETURN].
To stop recording partway
Press [∫].
To show the remaining time
Press [STATUS ].
[Note]
≥[-R] It may not be able to record after repeating about 30 times of
step 3 or recording or editing.
≥[+R] [+RW] Chapters for every 8 minutes are created automatically.
Start Cancel
RQT9131
57