Recording Broadcasts From External Equipment - Panasonic DMR-BW500 Operating Instructions Manual

Recording broadcasts from external equipment

[HDD]
See also "Important notes for recording" (➡ 28).
e.g., Connecting to the AV3 terminals on the front
≥Turn off the unit and external equipment before connecting.
This unit
S Video
cable
External equipment
Connect to Audio/Video output terminals.
§
The S VIDEO terminal achieves a more vivid picture than the
VIDEO terminal.
Preparation
≥Press [DRIVE SELECT] to select the HDD drive.
≥When the output signal from the external equipment is NTSC,
change the "TV System" to "NTSC" in the Setup menu (➡ 87).
1
While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.
e.g., If you have connected to AV3 input terminals, select
"AV3".
2
Press [REC MODE] to select the
recording mode.
≥DR, FR mode cannot be selected.
3
Select the channel on the other
equipment.
4
Press [¥ REC].
Recording starts.
To skip unwanted parts
Press [;] to pause recording. (Press again to restart recording.)
To stop recording
Press [∫].
S VIDEO VIDEO L/MONO - AUDIO- R
AV3 IN
Yellow White Red
Audio/Video
§
cable
RQT9131
55