Input Assignment - ABB COMMANDER 1900 Series Programming Manual

...5 ADVANCED CONFIGURATION LEVEL

5.4 Input Assignment

Information.
• Assignment Process Variables, Remote Set Points and Position Feedbacks – can all be assigned to any analog input
or maths block result (if fitted).
INPUt
ASSIGN
PV–1
IP–1
Single Pen
Instrument
2, 3 and 4 Pen
Instrument
2 Pen
PV–2
Inst.
3 and 4 Pen Instrument
3 Pen
Inst.
PV–3
4 Pen Instrument
PV–4
rSP–1
PFb-1
2 Controller
Single
Instrument
Controller
Instrument
rSP–2
PFb–2
UPdAtE
ACtIVE
UPdAtE
dONE
INPUt
ASSIGN
52
Page Header – Input Assign
Note. Entry and access to and from this page can only be implemented from the page header.
To advance to
ADVANCED CONFIGURATION LEVEL
IP–1 bLK–1
IP–2 bLK–2
IP–3 bLK–3
IP–4 bLK–4
IP–5
IP–6
Process Variable 2
Select analog input or maths block result for Process Variable 2 – see
inputs and maths blocks.
Process Variable 3
Select analog input or maths block result for Process Variable 3 – see
inputs and maths blocks.
Process Variable 4
Select analog input or maths block result for Process Variable 4 – see
inputs and maths blocks.
Remote Set Point (Controller 1)
Select analog input or maths block result for remote set point for Controller 1 – see
description of inputs and maths blocks.
Position Feedback (Controller 1)
Select analog input or maths block result for position feedback for Controller 1 – see
description of inputs and maths blocks.
Remote Set Point (Controller 2)
Select analog input or maths block result for remote set point for Controller 2 – see
description of inputs and maths blocks.
Position Feedback (Controller 2)
Select analog input or maths block result for position feedback for Controller 2 – see
description of inputs and maths blocks.
Update Active/Done
ACtIVE
The frame is displayed momentarily as any changes are stored in the non-volatile
memory. dONE is displayed on completion.
Return to frame.
Input Assign
frame press the
Process Variable 1
Select analog input or maths block result for Process Variable 1.
IP-1 to IP-6 –
bLK-1 bLK-4
to –
switch.
analog input 1 to 6 (if available)
maths block 1 to 4 (if available)
PV-1 for description of
PV-1 for description of
PV-1 for description of
PV-1
PV-1
PV-1
PV-1
for
for
for
for