Renault DUSTER Driver's Handbook Manual page 122

CRUISE CONTROL/SPEED LIMITER: speed limiter function
2 3
Putting the function on
standby
The speed limiter function is suspended
when you press the switch 5 (O). In this
case, the speed limit remains stored
and, depending on the vehicle, the
message "MEM" or the warning light
appears on the instrument panel,
accompanied by the stored speed.
2.40
Recalling the limit speed
If a speed has been saved, it can be re-
called by pressing switch 4 ((R)).
4 5
When the speed limiter is put on
standby, pressing switch 2 (+) re-
activates the function without taking
into account the stored speed: it is
the speed at which the vehicle is
moving that is taken into account.
(3/3)
1
Switching off the function
The speed limiter function is deac-
tivated if you press switch 1: in this
case a speed is no longer stored. The
orange instrument panel warning light
goes out, confirming that the func-
tion is stopped.