External Views; Installation, Adjustments And Maintenance; Installation; Defrosting And Draining - Haier BD-181SAA Service Manual

SERVICE MANUAL
Model: BD-181SAA, BD-271SAA

2-2. External views

Chapter 3 Installation, adjustments and maintenance

3-1. Installation

The freezer should be conveniently located for day-to-day use in a dry well-ventilated room.
Do not install the freezer where the temperature will go below 0°F or above 110°F, because it will
not maintain proper temperatures.
Be sure to install the freezer on a floor strong enough to support it when it is fully loaded.
The freezer must be solidly positioned on the floor if it is to function at its best. Shims may be used
to accomplish this wherever the floor is too uneven. If the place selected for the freezer is damp or
moist, place 2 X 4 s (51 mm X 102 mm) under its entire length to assure adequate support.

3-2 Defrosting and Draining

In most climates, defrosting will be necessary only about twice a year.
To have the freezer operate most efficiently, do not permit more than 1/2" (13 mm) of frost to
accumulate on the shelves.
To remove frost, scrape with a plastic or wood spatula or scraper.
Issue 2011-2-10
Ref1102S001V0
Rev.
Handle
Lid
Control panel
10