Troubleshooting
Problem
Previously programmed
information is erased.
"Recharge battery" is
displayed, "
or the unit beeps
intermittently.
You charged the battery
fully, but "Recharge
battery" is still displayed
and/or "
flash.
The IN USE/CHARGE
indicator light does not go
out after the battery has
been charged.
If you cannot solve your
problem
When you try to download
phone book data or
information from openLCR,
the voice prompt is not
announced from the
handset while "Listen &
follow phone
guidance." is being
displayed.
For more information about
Caller IQ
54
• If a power failure occurs, programmed
• Charge the battery fully (p. 8).
" flashes
• Clean the charge contacts and charge again
• Install a new battery (p. 8).
" continues to
• This is normal.
• Call our customer call center at
• Panasonic's e-mail address for customer
• Check the settings (p. 8–9).
• If you cannot solve a problem, consult openLCR
• Call openLCR's customer service department at
• openLCR's web site:
Cause & Remedy
information may be erased. Reprogram if
necessary.
(p. 9).
1-800-211-PANA(7262).
inquiries:
consumerproducts@panasonic.com
for customers in the USA or Puerto Rico ONLY
(see below).
1-866-openLCR (1-866-673-6527).
www.openLCR.com