Getting Started; Setting Up - Panasonic KX-TG1062 Operating Instructions Manual

Getting started

Setting up

Connections
L Use only the supplied Panasonic AC adaptor
PQLV219.
■ Base unit
*For DSL/ADSL service users
■ Charger
8 For assistance, please visit http://www.panasonic.com/help
Hooks
(120 V AC, 60 Hz)
Battery installation
L USE ONLY Ni-MH batteries AAA (R03) size.
L Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
L Confirm correct polarities (S, T).
Rechargeable Ni-MH ONLY
Important:
L If the handset does not automatically turn on
after installing/replacing batteries, place the
handset on the charger.
Battery charge
Charge for about 7 hours.
L When the batteries are fully charged, the charge
indicator goes off.
Confirm "Charging"
is displayed.