One Time Broadcast Transmission - Panasonic KX-FP181E Operating Instructions Manual

Sending Faxes
One time broadcast
This feature is useful for sending the same document to selected parties whose fax numbers are
stored in the EASY DIAL directory. If you only wish to send a document once, select the parties
for each transmission.
Before programming, make sure that the desired stations have been stored in the EASY
DIAL directory (p. 20).
1 Insert the document FACE DOWN.
If necessary, press
repeatedly to select the desired setting
(p. 30).
2 Rotate
EASY DIAL
displayed.
Display:
Press .
3 SET
4 Rotate
EASY DIAL
is displayed.
Example:
Press .
5 SET
To program other stations, repeat steps 4
and 5 (up to 20 stations).
FAX START
6 Press
of the desired stations.
The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each station, calling
each number sequentially.
After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report (p. 37).
To cancel the broadcast setting
STOP
1. Press while the unit displays the following
message.
Display:
The display will show the following.
2. Press .
SET
34
transmission!
RESOLUTION
until the following is
<ONE TIME BROAD>
DIR= [ 000 ]
until the desired name
Bill [ 000 ]
DIR=Bill [ 001 ]
after programming all
BROADCASTING
SEND CANCELLED?
YES:SET/NO:STOP
Display
STOP
EASY DIAL
SET
FAX START
Note:
If you select the "FINE", "SUPER FINE" or
"HALF TONE" resolution, the number of
pages that the unit can transmit will decrease.
If one of the stations is busy or does not
answer, the station will be skipped. All
skipped stations will be redialed up to 5 times
after all of the other stations have been
called.
RESOLUTION