Texas Instruments TI-84 Plus CE Getting Started page 30

Using the Special Character Set
After you select your desired language, a new item ( CHARACTER ) is added to
the TI-84 Plus CE CATALOG. This item accesses special characters and accent
marks used in the language that you chose for localization. You can use these
special characters and accent marks for display messages and text strings that
you want to store to a variable. You cannot, however, use them in variable
names.
Press y N to display the
1.
CATALOG
: CHARACTER is always the first
Note
item in the CATALOG .
2. Press Í to display the CHARACTER
screen.
Accent marks appear in the menus at
the bottom of the screen.
3. You can:
• Select a special character:
a) Press |, ~, †, or } to move the box to the special character that
you want to use in a message or text string.
b) Press Í to place the character on the edit line.
c) Press |, ~, †, or } to move the box to Done .
d) Press Í to paste the contents of the edit line to the previous
screen.
-or-
• Add an accent mark to a character:
Press the function key (^, _, `, a, or b) immediately above the
e)
26 Keyboard Basics
.